LAZUROL OKNOBAL ZÁKLAD S2060

Solvent-based primer uses to the system of the wood preservation exposed to weather conditions. It has excellent coverage, very good sanding and spreading rate, it dries quickly. It can be used also in interior.

SURFACE PREPARATION

Wood has to be clean, dry, rubbed down in grain direction and dust off with humidity max 12 %. Excessive resin (larch and pine) has to be stripped by thinner C6000. Quality and durability of coat depends on wood treatment.
For best results impregnate wood for uniform absorbency, better protection, in case of fungicidal impregnation against mould, fungi and insects. Than sands by fine sandpaper, dust off.
Remove all poorly adhering old coats to the solid surface when renovate.

THINNER S 6006 for brush or roller, S 6001 for spraying

RECOMMENDED APPLICATION

Properly mix before use. It shouldn´t be thinned, it is ready to use.
Penetrate by 1-2 coats of LAZUROL IMPREGNATING PRIMER S 1033 or UNIBAL VARNISH IMPREGNATION O 1000. Sand it after drying with fine sandpaper. Then apply 1-2 coats of LAZUROL OKNOBAL PRIMER S 2060. Optimal film thickness is 30-35 μm.
It can be recoat by gloss INDUSTROL UNIVERSAL S 2013, INDUSTROL PLUS S 2071 or matt INDUSTROL UNIMAT S 2075, for windows LAZUROL OKNOBAL ENAMEL U 2015 or LAZUROL FOR WINDOWS STANDARD S 2015.

Coverage

15-17 m²/l in one coat