PRAGOPRIMER UNIVERZÁL S2035

Solvent-based primer is used on metal surfaces under solvent-based topcoats, oil and nitrocellulose paints. The coating dries quickly, it is effectively anticorrosive and widely used, both interior and exterior.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, rust and dust. Degrease by technical benzene P 6402, acetone P 6401 or hot water with detergent. Salt residue rinse with water. Defective or poorly adhering impurities remove by sanding or scraping, thoroughly remove rust (metal brush, grindstone, rust remover). Rust remover rinse by water.
Porous materials impregnate for uniform absorbency of the surface.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats to the solid surface when renovate. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6005 for brush or roller, C 6000 for spraying

RECOMMENDED APPLICATION

Mix properly before use, thin as needed.
Metal: Apply 1 coat of PRAGOPRIMER UNIVERSAL S 2035, optimal film thickness is 30-35 µm (after 1 hour of drying at 20 °C, it is possible to spray with solvent-based enamel). Apply 2-3 coats of INDUSTROL UNIVERZÁL S 2013 or RADBAL STANDARD S 2119, INDUSTROL UNIMAT S 2075.

Coverage

12-14 m²/l in one coat