LAZUROL TIXOTROPNÍ LAK S1091

Solvent-based varnish is designed for transparent gloss/matt coating of especially vertical wood and metal surfaces, for example: wooden wall panelling and ceiling in interior and exterior. The varnish creates almost solid gel. It becomes thinner by mixing and application by brush is simple. Then it changes into gel again. It doesn´t flow down both the vertical surface and the brush.

SURFACE PREPARATION

Wood has to be clean, dry, rubbed down in grain direction and dust off with humidity max 12 %. Excessive resin (larch and pine) has to be stripped by thinner C6000. Quality and durability of coat depends on wood treatment.
For best results impregnate wood for uniform absorbency, better protection, in case of fungicidal impregnation against mould, fungi and insects. Than sands by fine sandpaper, dust off and apply varnish.
Remove all poorly adhering old coats to the solid surface when renovate.

THINNER S 6006 for washing tools

RECOMMENDED APPLICATION

Properly mix before use. It shouldn´t be thinned, it is ready to use.
It is suitable to apply 1 coat of penetration LAZUROL FUNGICIDAL IMPREGNATION S 1033 in exterior or colourless LAZUROL CLASSIC S 1023. It sands after drying 24 hours. Apply 2 coats of LAZUROL THIXOTROPIC VARNISH S 1091. Optimal film thickness of one coat is 35-40 µm. Recoat after 24 hours.

Coverage

8-10 m²/l in one coat