INDUSTROL PLUS S2071

Universal solvent-based quick drying gloss enamel uses on metal and wood surfaces exposed to weather conditions, also in interior. It dries quickly, has excellent spreading rate and gives gloss surface, thus it is suitable for industrial applications.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, dust. Metal rids of rust.
Wood sands in grain direction and dusts off, humidity of wood max 12 %, excessive resin strips by thinner C 6000. Paint by primer at first.
Concrete or masonry has to be dry, compact, clean and aged (4-6 months) and insulated against ground humidity.
Porous materials impregnate for uniform absorbency of the surface and undercoat.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6001 for spraying, S 6005 and S 6006 for brush or roller

RECOMMENDED APPLICATION

Mix properly before use, thin as needed.
Metal: Apply 1 coat of PRAGOPRIMER STANDARD S 2000 or FORMEX PRIMER FOR GALVANIZED IRON S 2003, PRAGOPRIMER UNIVERSAL S 2035, PRAGOPRIMER PROFI S2 129. Cement if necessary (i.e. BKP Rapid), sand it with sandpaper no. 180-220 while wet. Apply 1 coat of PRAGOPRIMER STANDARD S 2000 or PRAGOPRIMER UNIVERSAL S 2035, PRAGOPRIMER PROFI S 2129. Sand it again with a sandpaper no. 280-320 while wet. Apply 1-2 coats of INDUSTROL PLUS S 2071.
Wood: Apply 1 coat of impregnation LAZUROL CLASSIC S 1023 or UNIBAL VARNISH IMPREGNATION O 1000. Apply 1-2 coats of PRAGOPRIMER PLUS S 2070 or LAZUROL OKNOBAL PRIMER S 2060. Sand according needs by sandpaper no. 150-180, dust off. Apply 1-2 coats of INDUSTROL PLUS S 2071.

Coverage

15-17 m²/l in one coat