LAZUROL CLASSIC S1023
IMPREGNATING WOOD STAIN WITH OILS
- Excellently protect soft and hard wood
- Penetrates deeply
- Enhances beaty of wood
Solvent-based wood stain protects and decorates soft and hardwoods exposed to weather conditions, also for interior, especially: planed wood, sawn timber, garden furniture, wooden wall panelling and ceilings, fences, cottages and wooden houses, windows, doors. It deeply penetrates wooden structure and enhances natural beauty, provides highly effective coating. It contains natural oil and also protects against UV radiation. Renovation of old coating is very simple. Colourless wood stain use in interior only.
SURFACE PREPARATION
Wood has to be clean, dry, rubbed down in grain direction and dust off with humidity max 12 %. Excessive resin (larch and pine) has to be stripped by thinner BALTECH C6000. Quality and durability of coat depends on wood treatment.
It is recommended to treat the exterior wood against mould, fungi and insects by LAZUROL FUNGICIDAL IMPREGNATION S1033 or LAZUROL FUNGI. Than surface sands by fine sandpaper, dust off and apply wood stain.
Remove all poorly adhering old coats to the solid surface when renovate.
THINNER: BALTECH S6006 for cleaning tools
RECOMMENDED APPLICATION
Properly mix before use. It shouldn´t be thinned, it is ready to use.
Minimum temperature for application is 7 °C. Apply 1-2 coats for interior and 3 coats for exterior use. The colourless wood stain is for interior only. Recoat after 24 hours. When you wipe surface after 10-15 minutes with dry brush or cloth, beauty of wood is highlighted.
For high gloss surface apply LAZUROL UNIVERSAL VARNISH S1002 or natural LAZUROL GOLD S1037. For high durability of floor use LAZUROL FLOOR VARNISH S1020.
Coverage
8-10 m2/l depending on substrate absorbency
