HOSTAGRUND 3v1 PRIM BÁZE S2177

The bases is intended for mixing centres only. The solvent-based anticorrosive semi-matt single coat combines primer, barrier and topcoat. It is designed for direct coating on metal, steel and wood, both exterior and interior. It can be also used for porous materials as wood and chipboards after previous penetration.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, rust and dust. Degrease by technical benzene P 6402, acetone P 6401 or hot water with detergent. Salt residue rinse with water. Defective or poorly adhering impurities remove by grinding or scraping, thoroughly remove rust (metal brush, grindstone, rust remover). Rust remover rinse by water.
Porous materials impregnate for uniform absorbency of the surface.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats to the solid surface when renovate. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6006

RECOMMENDED APPLICATION

Mix properly before use. It shouldn´t be thinned, it is ready to use.
Apply 2-3 coats according needs, more than 24 hours between coats. Optimal film thickness of one coat is 30-40 µm.

TINTING

Different colour shades are prepared by tinting system BALMIX.

Coverage

9 m²/l in one coat