EPOLEX LAK NA DŘEVO S1300

The solvent-based epoxy varnish high gloss uses for clear and tough coating on wood, fibreboards, metal and some plastics and for penetration of absorbent materials as concrete and masonry. The varnish is resistant to many chemical substances, solvents, oils, hydroxides and fuels. It is resistant to water and humidity, withstand temperature till 120 °C. The varnish is approved for coating on food industry equipment that is in direct contact. It isn´t suitable for exterior use.

SURFACE PREPARATION

Wood has to be clean, dry and free of grease, dust, humidity of wood max 12 %, excessive resin strips by thinner C 6000. Smooth in grain direction and dust off. Quality and durability of coat depends on wood treatment.
Wood impregnates by thinned epoxy varnish for uniform absorbency. Than smooth by fine sandpaper, dust off and the varnish applies.
Metal has to be clean, dry and free of grease and rust, dust off.

THINNER S 6300
HARDENER S 7300

RECOMMENDED APPLICATION

The varnish mixes with hardener in weight ratio S1300: S 7300 = 100 : 40 and properly mix together.
Wood: Apply 1 coat of EPOLEX FOR WOOD S 1300 thinned for flow time 15-25 s at Ford cup 4. Drying time is 24 hours at room temperature. Smooth by sandpaper no. 280-320 and dust off. Apply 2nd coat of S 1300, drying time 24 hours, smooth with a sandpaper no. 320, dust off. Apply 3rd coat of S 1300, drying and hardening can be forced at 60 °C for 60 min, 80 °C for 45 min, 100 °C for 30 min. The coat can be smoothed, polished by abrasive paste or polished.

Coverage

11-13 m²/kg in one coat