BETEX 2v1 NA BETON S2131
IMPREGNATION AND TOPCOAT FOR CONCRETE
![](https://old.bal.cz/wp-content/uploads/2017/02/BETEX_BETON_07-600x600.png)
- Moisture resistance
- Increased chemical resistance
- Non-slip certificate
The solvent-based paint is uses for semi-matt decorative coating floors of cellars, garages, terraces, balconies, walls and columns. The product is highly durable and resistant to weather conditions, short-term resistant against some solvents as diesel, engine oil, sulphuric acid.
SURFACE PREPARATION
The surface has to be clean, compact, dry, aged (4-6 months) and insulated against ground humidity and free of dust, grease, asphalt and petroleum products.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats.
THINNER S 6005
RECOMMENDED APPLICATION
Mix properly before use, thin as needed. The paint thins in weight ration S 2131: S 6005 = 1: 1 and first coat makes as penetration. Second coat applies as mixture in weight ratio S 2131: S 6005 = 10: 1 and after drying for 24 hours. Third coat applies without thinning or with small amount for absorbent surfaces, always after draying. Optimal film thickness is 80 µm.
Coverage
7-8m²/1 kg in one coat
Application
- Brush
- Roller