BETEX 2v1 NA BAZÉNY S2852

The solvent-based polystyrene paint uses as impregnation and topcoat on concrete surfaces, masonry and plasters exposed water, vapours or high humidity. It can be used for pools and metal tanks. It isn´t designed for smoothed concrete surfaces.

SURFACE PREPARATION

The surface has to be clean, compact, dry, aged (4-6 months) and insulated against ground humidity and free of dust, grease, asphalt and petroleum products. It is suitable to dust off by vacuum cleaner. In case of blasting, let the surface thoroughly dry. Bigger unevenness smooth. Humidity shouldn´t exceed 5 %.

THINNER BALTECH S6005

RECOMMENDED APPLICATION

Mix properly before use. It shouldn´t be thinned, it is ready to use.
Plasters, masonry, concrete: The paint thins in weight ratio S2852: S6005 = 1:1 and apply 1 coat of impregnation by mixture. Apply 3-5 coats of BETEX 2v1 FOR POOLS.
Metal: Apply 1 coat of FORMEX PRIMER FOR GALVANIZED IRON S2003. The paint applies till 24 hours or after 7 days, 3-4 coats of BETEX 2v1 FOR POOLS, 4 hours between coats at 23 °C. The whole film thickness is 120 µm. The paint could be exposed to water after 7 days.

Coverage

5-6 m²/1 kg in one coat