BARLET AKRYLÁT PASTOVITÁ OMÍTKA RÝHOVANÁ

PRODUCT

The water-based plasters makes highly decorative and weather resistant finish, both exterior and interior. Various shades are fade resistant and are available in acrylic, silicone and silicate versions grained/grooved with particles up to 1.5 mm and 2.0 mm.

SURFACE PREPARATION

The surface has to be dried, cleaned, levelled and aged, free of loose particles and dust, without cracks. Suitable substrates are all mineral plasters and mortar adhesives of façade insulating systems.

RECOMMENDED APPLICATION

The primer
Apply BARLET PRIMER PAINT in asked shade to avoid defects when plaster smoothing 4 hours before. The primer paint dilute by 10 % of water and mix it.
Application
Mix properly by slow-motion spiral mixer just before use. It can be diluted by small amount of water. It applies uniformly without interruption by stainless steel trowel in grain thickness. Final structure of the finish makes by plastic float after some time of drying.
Grooved structure makes by vertical, horizontal or circular motions.
Grained structure makes by smoothing, the finish unifies.
Different moves make a different structure.
Conditions
Summer supports drying (temperature over 25 °C, hot substrate, wind) and processing shortens (linking and making of the structure).
Spring and autumn (temperature between 5-12 °C, high humidity) extend drying. Use variation “Z” without additives that prolong drying. Possibility of mechanical damage increases by weather conditions and its changing.
The temperature under 10 °C requires more careful work, under 5 °C isn´t suitable.
Consumption
The primer paint 0.25 kg/m2
The grained plaster size 1.5 mm 2.5-2.8 kg/m²
The grained plaster size 2.0 mm 3.0-3.2 kg/m²
The grooved plaster size 1.5 mm 2.1-2.3 kg/m²
The grooved plaster size 2.0 mm 2.3-2.5 kg/m²
Consumptions are approximate and depends on substrate (stucco and adhesive structure) and application.

TINTING

BASE and BASE S are tinted by system TELURMIX and RAINBOW, BASE also uses as white.