EPOLEX EMAIL PROFI S2321

The solvent-based epoxy enamel gloss uses for wood, metal, masonry and some plastics. The coat is resistant to water, humidity, various chemicals, especially hydroxides, oils, fuels and many solvents. It has tendency to chalking and loses gloss in exterior. The white shade 1000 is approved for coating on food industry equipment that is in direct contact. The coating could be smoothed and polished.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, dust. Metal rids of rust.
Wood smoothes in grain direction and dusts off, humidity of wood max 12 %, excessive resin strips by thinner C 6000. The primer paints first.
Concrete or masonry has to be dry, compact, clean and aged (4-6 months) and insulated against ground humidity.
Porous materials impregnate for uniform absorbency of the surface and undercoat.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6300
HARDENER S 7300

RECOMMENDED APPLICATION

Mix properly before use, add hardener in weight ratio S 2321: S 7300 = 100: 33, mix together and thin as needed.
Metal: Apply 1 coat of EPOLEX PRIMER PROFI S 2300. Apply 1-2 coats of EPOLEX ENAMEL PROFI S 2321 after drying of the primer. Second coat applies after 24 hours (can be forced at 60-100 °C for 60-30 minutes). Minimum drying temperature is 10 °C.

Coverage

11-15 m²/kg in one coat