INDUSTROL UNIMAT S2075

Universal solvent-based matt enamel uses on metal and wood surfaces exposed to weather conditions, also in interior, especially: door frames, fences, parapets, constructions, metal objects, wooden furniture and panelling, garden furniture. It dries quickly, has excellent spreading rate, gives matt surface, thus it is widely used.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, dust. Metal rids of rust.
Wood sands in grain direction and dusts off, humidity of wood max 12 %, excessive resin strips by thinner C 6000. Paint by primer at first.
Concrete or masonry has to be dry, compact, clean and aged (4-6 months) and insulated against ground humidity.
Porous materials impregnate for uniform absorbency of the surface and undercoat.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6001 for spraying, S 6006 for brush or roller

RECOMMENDED APPLICATION

Mix properly before use, thin as needed.
Wood: Apply 1 coat of impregnation LAZUROL CLASSIC S 1023 or UNIBAL VARNISH IMPREGNATION O 1000. Sand according needs by sandpaper no. 150-180, dust off. Apply 1-2 coats of PRAGOPRIMER PLUS S 2070 or LAZUROL OKNOBAL PRIMER S 2060. Sand by sandpaper no. 280-320, dust off. Apply 1-2 coats of INDUSTROL UNIMAT S 2075.
Metal: Apply 1 coat of PRAGOPRIMER STANDARD S 2000. Sand it with sandpaper no. 280-320. Apply 1-2 coats of INDUSTROL UNIMAT S 2075.

Coverage

13 m²/l in one coat