INDUSTROL UNIVERZÁL S2013

Solvent-based enamel uses for coating of metal, wood and masonry, both exterior and interior, especially: metal constructions, fences, doors, door frames, parapets, wooden furniture and panelling, garden furniture. The paint has excellent coverage and spreading rate, gives durable high gloss finish. It supplies in wide range of shades. The product has long-lasting storage life without changing of properties. The surface paint by primer at first.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, dust. Metal rids of rust.
Wood sands in grain direction and dusts off, humidity of wood max 12 %, excessive resin strips by thinner C 6000. Paint by primer at first.
Concrete or masonry has to be dry, compact, clean and aged (4-6 months) and insulated against ground humidity.
Porous materials impregnate for uniform absorbency of the surface and undercoat.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6001 for spraying, S 6006 for brush or roller

RECOMMENDED APPLICATION

Mix properly before use, thin as needed.
Metal: Apply 1 coat of PRAGOPRIMER STANDARD S 2000 or FORMEX PRIMER FOR GALVANIZED IRON S 2003, PRAGOPRIMER UNIVERSAL S 2035, PRAGOPRIMER PROFI S 2129. Cement if necessary (i.e. BKP Rapid), sand it with sandpaper no. 180-220 while wet. Apply 1 coat of PRAGOPRIMER STANDARD S 2000 or PRAGOPRIMER UNIVERSAL S 2035, PRAGOPRIMER PROFI S 2129. Sand it again with a sandpaper no. 280-320 while wet. Apply 2-3 coats of INDUSTROL UNIVERSAL S 2013.
Wood: Apply 1 coat of impregnation LAZUROL CLASSIC S 1023, drying time 24 hours. Apply 1-2 coats of PRAGOPRIMER PLUS S 2070 or LAZUROL OKNOBAL PRIMER S 2060. Apply 2-3 coats of INDUSTROL UNIVERSAL S 2013. Every coat dries for 24 hours (20 °C).
It is better to apply enamel in more coats for longer life. Optimal film thickness is 30-35 µm.

Coverage

14-16 m²/l in one coat