LAZUROL OKNOBAL EMAIL U2015

Solvent-based urethanized enamel uses for coating of woodworks, especially: wooden windows, doors, ceilings, both interior and exterior. It has high durability, coverage, excellent plasticity and silk gloss. The email has perfect spreading rate, anti-blocking reduces stickiness after drying, thus improve handling. It protects against weather conditions and UV radiation, it has long life.

SURFACE PREPARATION

Wood has to be clean, dry, rubbed down in grain direction and dust off with humidity max 12 %. Excessive resin (larch and pine) has to be stripped by thinner C 6000. Quality and durability of coat depends on wood treatment.
For best results impregnate wood for uniform absorbency, better protection, in case of fungicidal impregnation against mould, fungi and insects. Than sands by fine sandpaper, dust off.
Remove all poorly adhering old coats to the solid surface when renovate.

THINNER S 6006

RECOMMENDED APPLICATION

Properly mix before use, thin as needed.
Penetrate by 1-2 coats of LAZUROL IMPREGNATING PRIMER S1033. Apply 1-2 coats of primer for wood PRAGOPRIMER PLUS S 2070 or LAZUROL OKNOBAL PRIMER S 2060. Apply 1-2 coats of LAZUROL OKNOBAL ENAMEL U 2015 in film thickness 35 µm. Apply in two thin coats for longer life. Recoat after 10 hour when temperature is 20-25 °C and film thickness 30-35 µm.

Coverage

15-17 m²/l in one coat