FORMEX ZÁKLAD NA POZINK S2003

The solvent-based primer uses on light metals, galvanized iron, both exterior and interior. It is designed under air-drying solvent based and nitrocellulose topcoats. It dries quickly. It can be used on radiators.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, rust and dust. Degrease by technical benzene P 6402, acetone P 6401 or hot water with detergent. Salt residue rinse with water. Defective or poorly adhering impurities remove by smoothing or scraping, thoroughly remove rust (metal brush, grindstone, rust remover). Rust remover rinse by water.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats to the solid surface. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER C 6000 for spraying, S 6005 for brush or roller

RECOMMENDED APPLICATION

Mix properly before use, thin as needed.
Apply 1 coat of FORMEX PRIMER FOR GALVANIZED IRON S 2003. It is possible recoat by nitrocellulose or solvent-based topcoat after 1 hour of drying at 20 °C (can be forced till 80 °C). Optimal film thickness is 35-40 µm. Apply 1-2 coats of INDUSTROL UNIVERSAL S 2013 or INDUSTROL PROFI U 2129, RADBAL STANDARD S 2119.

Coverage

10-12 m²/l in one coat