HOSTAGRUND 2v1 NA ŽELEZO S2160

Solvent-based thixotropic single coat uses for metal constructions, both exterior and interior, especially: columns, bridges, chassis, fences. It can be used for light metals, oxidized galvanized sheets and non-metal surfaces as concrete and wood after previous penetration. Thixotropy allows high build application, by airless 300 µm of wet film at once. It dries quickly even in high build coat and has silk finish. It is supplied in wide range of shades.

SURFACE PREPARATION

The surface has to be clean, dry and free of grease, rust and dust. Degrease by technical benzene P 6402, acetone P 6401 or hot water with detergent. Salt residue rinse with water. Defective or poorly adhering impurities remove by grinding or scraping, thoroughly remove rust (metal brush, grindstone, rust remover). Rust remover rinse by water.
Porous materials impregnate for uniform absorbency of the surface.
Previously painted surfaces clean, degrease and remove all poorly adhering old coats to the solid surface when renovate. Verify compatibility between old paint and new one. Perform a test on the area 1 m².

THINNER S 6005 for cleaning tools

RECOMMENDED APPLICATION

The paint doesn´t thin for airless spraying and brush applications, slightly mix volume.
Airless: Apply 1 coat of HOSTAGRUND S 2160 with dry film thickness 100 µm.
Conventional spraying or brush: Apply 1-2 coats of HOSTAGRUND S 2160 with total dry film thickness 100 µm. Other coat applies after 4 hours, at the latest 24 hours.

Coverage

4,5 m²/l in one coat